Hardware

How to switch from NTSC to PAL D-Link DSM-320RD

feeds@yuku.com (raphael99) — Thu, 13 Nov 2008 01:49:00 GMT

Hello it's my first post, hope to be in the right place.
I just bought D-Link DSM-320RD and need to switch from NTSC to PAL. Anyone knows how to do it?

PROBLEM WITH US VERSION OF D-LINK - how to convert 120 to 220v ?

feeds@yuku.com (luks) — Sun, 14 Sep 2008 13:19:49 GMT

hi, at first i`m from Poland. i have D-link from USA. EU Version is 120-220V compatible, but my is only 120V (sticker at back dvd).

when i open player, on power adapter i see - 2A 250V (on plate) and many parts also 100-240V, 250V.

can yuo send me photos of yours power adapter ?? maybe this is the same ??????????

borak@tlen.pl

PROBLEM WITH US VERSION OF D-LINK - how to convert 120 to 220v ?

feeds@yuku.com (luks) — Sun, 14 Sep 2008 13:19:09 GMT

hi, at first i`m from Poland. i have D-link from USA. EU Version is 120-220V compatible, but my is only 120V (sticker at back dvd).

when i open player, on power adapter i see - 2A 250V (on plate) and many parts also 100-240V, 250V.

can yuo send me photos of yours power adapter ?? maybe this is the same ??????????

borak@tlen.pl

How did you setup DSM-320?

feeds@yuku.com (mrimd) — Sun, 11 Mar 2007 22:36:39 GMT

I picked up DSM-320 from ebay and spent whole weekend to make it connect to media server. Not working, of course. It seems a lot of you have been enjoying it. Please advise me how you connected DSM-320.

I have hardware firewall to WAN and LAN side is connected to wireless router which has 192...1 ip address, also acting as DHCP server and gateway-from ipconfig command.

On DSM-320 with firmware 1.09, whenever the setting is DHCP, subnet mask is automatically set to 255.255.0.0...

Network Problem

feeds@yuku.com (NiCK73) — Thu, 05 Oct 2006 07:33:48 GMT

Hi!
I have a DSM-320 mediaplayer. My problem is the following. I have two computers running the media server software. One XP computer and one Win98SE computer. When I have my W98SE computer up and running everything works well. I can use both media servers. When I shut down the W98SE computer and wants to run the server from my XP computer only it fails... Anyone got a clue how to solve this??? At D-link they can't solve it, the final help was that I should reinstall my XP computer and...

DSM-320RD sans remote ... will a DSM-320 remote work?

feeds@yuku.com (Amplified) — Mon, 28 Aug 2006 16:00:02 GMT

I recently acquired a DSM-320RD console (without a remote)

Is it possible to use the remote that originally came with my DSM-320 with the DSM-320RD box?

If so, is there a way to enable the remote to "learn" the code to communicate with the 320RD console?

Any info and/or insight very much appreciated.

PSU is blown

feeds@yuku.com (Adamski) — Wed, 08 Mar 2006 06:59:47 GMT

My power supply in the box is blown. Do you know what voltage does it give as output? On the board it shows 12V 1.5A, but I'm not sure if it is correct. There are 4 connectors (2 black and 2 yellow) coming off the PSU, can someone tell me what voltages each has. Thanks

Power On Issues

feeds@yuku.com (hsbrown) — Tue, 20 Dec 2005 14:33:12 GMT

I have a DSM-320 that frequently has problems booting. Especially if I turn it off, and power it back on in less than about a 30 minute time frame.

I can sometimes get it to come back on by unplugging it, and then hitting the reset button, but that doesn't work very often.

Usually, I just have to wait for an hour, and then I can get it to come back on. Note that it will run for hours without hanging or anything, so I don't think it is a heat issue (although that's certainly...

European A4 with 1.06 firmware

feeds@yuku.com (wergon) — Fri, 09 Dec 2005 16:50:18 GMT

Hi!

I have an european DSM-320 with A4 hardware release.
It has a SCART output insted of component.

Does anybody tried the US version 1.06 with this hardware release?

I'm running right now 1.05eu.1

Required Signal Strength

feeds@yuku.com (andyw715) — Fri, 21 Jan 2005 14:32:07 GMT

Hello I have the 320(US version firmware 1.04) with DLink wireless router.
I have performed the wireless signal enhancement fix noted in this board.
On the 320 I installed a Dlink M60AT directional antenna. The router is about 30' away upstairs. I have a direct line of sight from the router to the 320 (the computer room looks down on the family room where the 320 is).

The server machine (P4 2.8, 1.5MB Ram) is cabled to the router.

I can get an avg signal of 78-82...